Entry Point Implementation Conformance Statement (ICS)

V260623 Copyright ©2026 EMVCo, LLC. All rights reserved. Page 1 of 4 ICS Entry Point Standalone – version 2.11d Entry Point Implementation Conformance Statement Version 2.11d ICS Reference Number and Validity Period (for EMVCo administrative use only) ICS Reference Number: Valid from: Valid to: Notice: This ICS form shall be completed for products submitted to receive EMVCo Contactless Product testing and compliance/approval. The form shall be completed in its entirety. Part I - Administrative Product Provider Identification M Company Legal Name: (As listed on the Letter of Registration) M EMVCo Registration Number: Laboratory Identification M Company Legal Name: M EMVCo Registration Number: ICS Submission Type M Select submission type M Is Entry Point submitted in Standalone approval or in a Contactless Product approval Standalone In Contactless Product M Is this ICS a replacement of a previously accepted ICS? Yes No C If Yes. p lease provide the reference number of the previously accepted ICS C If Yes, p lease provide the reason for replacing the ICS C If Yes, please provide details of ICS replacement PART II – Entry Point Module Identification Product Name (Entry Point Name) Product Version (Entry Point Version) Product Checksum (Entry Point Checksum) The Entry Point Module software may be contained within a single physical location or split across several physical subcomponents devices (ECR, PIN pad, server, mobile etc.), these hardware location(s) must be fully described below. If Entry Point Module is a single Module (so in a single location) the first row must be filled. In that case Component Software Name, version and Checksum shall be identical to the Product lines above. Hardware Component Name Type of Hardware Component Component Software Name Component Software Version Component Software Checksum OS name of the Component OS version V260623 Page 2 of 4 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Entry Point Standalone – version 2.11d PART III – EMV ® Specifications Book A & B Specification Version: PART IV – Entry Point Module Options Pre processing support O Does Entry Point support Status Check Application Selection support O Does the Entry Point support Extended Selection Autorun Parameter support O Does Entry Point support Autorun C If yes at previous question, Can the Autorun be deactivated? POI Information support O Does Entry Point support the POI Information? Checksum Value Supported M Does the Product comply with the Checksum rules as defined in Contactless Product administrative process V260623 Page 3 of 4 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Entry Point Standalone – version 2.11d Part VII - Digital Signatures Product Provider I hereby declare that the above referenced product currently is and will remain in compliance with the above referenced EMV specification for all mandatory and supported optional requirements unless noted as non-compliant on the attached sheets Comments Signature Laboratory I hereby declare that this ICS document has been reviewed, and that all product information is consistent throughout the ICS. Comments Signature EMVCo Approval Secretariat Signature V260623 Page 4 of 4 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Entry Point Standalone – version 2.11d