Contact Terminal Level 2 – Implementation Conformance Statement

Verify Form Data Export Form Data Import Form Data Level 2 – EMV® KERNEL Implementation Conformance Statement Version 4.4d ICS Reference Number and Validity Period (for EMVCo administrative use only) ICS Reference Number: Valid from: Valid to: Notice: This ICS form shall be completed for products submitted to receive EMVCo Level 2 testing and approval. The form shall be completed in its entirety. Part I - Administrative Product Provider Identification Company Legal Name: (As listed on the Letter of Registration) EMVCo Registration Number: Laboratory Identification Company Legal Name: EMVCo Registration Number: ICS Submission Type Select submission type For any submission except Initial, please provide the approval number of the Baseline configuration (cf Config ‘1C’ on the letter of approval, if already approved) Does the Product comply with the SB 308 'Contact Chip features sunsetting - Phase 1'? (Mandatory for Initial Submission, Optional for renewal or an additional configuration) Is this ICS a replacement of a previously accepted ICS? Yes No If Yes, please provide the reference number of the previously accepted ICS If Yes, please provide the reason for replacing the ICS V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 1 of 25 If Yes, please provide details of ICS replacement V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 2 of 25 If EMVCo approval is issued, the EMV Kernel identification information provided in Part II is utilized on the EMVCo approval notification and posted on the EMVCo website. This identification information must agree with the information provided on the approval request letter and test results submitted for EMVCo evaluation. Inconsistent identification information in these three documents may delay the approval process or may result in a decline for the approval request. If submitting multiple PIN pads for approval under the PIN Pad Change process, section IIb must be completed for each PIN Pad. Any PIN pad identified in section IIa will serve as the baseline for this process. V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 3 of 25 PART IIa – Product Identification EMV Kernel Name This is the name of the overall EMV Kernel whatever the Kernel is split is several submodules or in a single module. In case the Kernel is in a single physical location, the EMV Kernel Name maybe the same as Kernel Name below (first line of 'as tested in') EMV Kernel Version: EMV Kernel Java runtime machine Name (only in Case that the Kernel run on a JVM): EMV Kernel Java runtime machine Version (only in Case that the Kernel run on a JVM): Device/Terminal(s) Name within which the EMV Kernel will be tested (referred to 'As tested in' Name): The EMV Kernel may be contained within a single physical location, module, or library in which case the entries above must be complete. However, when the EMV Kernel is split across several physical components devices (e.g.: server, mobile etc.), All hardware components must be fully described below (Only first line if a single location, multiple lines if multiple locations): Note: If PIN Pad contains Kernel functions (such as PIN management), it shall be described below and in section ‘Part IIb - PIN Pad Identification’ Device / Terminal HW Name Type of Device Kernel Name (or sub-kernel if multiple location) Kernel Version (or subkernel if multiple location) Kernel Checksum (or subkernel if multiple location) OS Name (or sub-OS if multiple location) OS version (or subOS if multiple location) IFM (Level 1) Approval Reference1 Please identify the Device / Terminal within which the EMV Kernel will be tested, for information purposes only (multiple tick possible): Standard POS Standard POS with PIN Pad ATM Cash Register based Solution PC based Solution mPOS / Phablet 1 When supporting the PIN Change Process the IFM Approval Reference may vary for some PIN pads, if so these references must be identified in section IIb. V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 4 of 25 Tablet Merchant Server Solution (closed environment) Cloud based Solution (open environment) Others If “Others”, please describe the device/terminal with in which kernel is tested Is Device / Terminal within which the EMV Kernel will be tested PCI-PTS approved (For information purpose only)? If the answer to the previous question is yes, please provide the PCI-PTS Certificate reference Are Device / Terminal(s) within which the EMV Kernel is tested present in the Laboratory (Devices maybe not present ONLY for ATM or Petrol Station or Cloud or Server based Solutions) If the answer to the above question is “No”, are the Device / Terminal(s) following the Solution 1 (as per Administrative Process section 4.2.4)? (If the answer is ‘No’ the Laboratory shall request the EMVCo Acceptance before starting any test) If the answer to the two above question is “No”, please describe why the ATM or Petrol Station or Cloud or Server based Solutions cannot be located in the Laboratory premises If the Device / Terminal within which the EMV Kernel is tested is NOT present in the Laboratory, Product Provider understand he has to comply with the Sample retention described in the Administrative Process Section 4.2.4. V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 5 of 25 PART IIb – PIN Pad Identification If the PIN is supported, is the PIN Pad Yes No transparent? If the PIN Pad is transparent, please confirm Yes you provided the requested transparency information as per Administrative Process section 2.7.7 The tables below shall be used to describe all PIN pads, including those defined in part IIa. - If a single PIN Pad is supported it must be described in the first Table below. Section VII, first line must also be filled. - In case the PIN Pad is the same device as the Device/terminal within which the Application Kernel will be tested (a single box), it must be described in the first Table below (copy from section IIa the 'Device/terminal Name' into the section IIb ' PIN Pad “Marketing name”). - For PIN Pad Change Process; the minimum number of PIN pads that must be supported is 1, there is no maximum number of PIN pads that may be submitted for the PIN Pad Change Process. If more PIN pads are submitted than space allows, an additional ICS Part IIb must be provided. - If a PIN Pad is supported, the question ‘is the Terminal equipped with a PIN Pad’ of section V and VII shall be answered with ‘yes’ (even if the PIN Pad is the same device as the Device/terminal within which the Application Kernel will be tested). - If this ICS is a subsequent submission with additional PIN Pad(s), make sure to assign to each new PIN Pad a number that has not been used for another PIN Pad during the previous session(s). V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 6 of 25 PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 7 of 25 PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 8 of 25 PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: PIN Pad PIN Pad “Marketing name” which will be submitted with the application kernel. PIN Pad software name and version: If the PIN Pad is Non Transparent, are the EMV functionality limited to PIN processing? Please note: in order for the PIN Pad to be eligible for this process the only EMV functions that may reside on the PIN pad are those related to PIN processing. List all EMV PIN processing functions residing on the PIN pad (only for Non Transparent PIN pad): PIN Pad combined with an IFM? IFM (Level 1) approval reference, if combined with PIN pad: PIN Pad Checksum: V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 9 of 25 PART IIc – Additional Operating System Identification This section applies to the Multi OS process only The tables below shall be used to describe the additional Operating Systems for the Multi OS process. When supporting the Multiple OS process indicate all EMV kernel operating systems and versions submitted for type approval at this time, in addition to the operating system defined in part IIa. Additional OS Identification EMV Kernel Operating System Name: EMV Kernel Operating System Version: I confirm that for this additional operating system to apply, no recompilation or linkage for the kernel code is needed and the kernel checksum and/or PIN pad checksum does not change Additional OS Identification EMV Kernel Operating System Name: EMV Kernel Operating System Version: I confirm that for this additional operating system to apply, no recompilation or linkage for the kernel code is needed and the kernel checksum and/or PIN pad checksum does not change Additional OS Identification EMV Kernel Operating System Name: EMV Kernel Operating System Version: I confirm that for this additional operating system to apply, no recompilation or linkage for the kernel code is needed and the kernel checksum and/or PIN pad checksum does not change Additional OS Identification EMV Kernel Operating System Name: EMV Kernel Operating System Version: I confirm that for this additional operating system to apply, no recompilation or linkage for the kernel code is needed and the kernel checksum and/or PIN pad checksum does not change V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 10 of 25 PART III – Terminal Resident Data Objects & Parameters common to all Configurations Title Description Value AIDs Dynamic Selection Certificate Revocation List Format How Many AIDs with the associated set of data (such as TAC,…) can be supported by the Application Kernel? (if unlimited number please enter 99) Is your Multi-Configuration Kernel capable of dynamically selecting a configuration at the time of transaction When supporting certificate revocation, what is the Certificate Revocation List format? (CRL format must include: RID, CA Public Key Index, Certificate Serial Number, and optional additional data) Is the Level 2 Contact Kernel Random Generator using the algorithm described in Book2, section 11.3 If the Level 2 Contact Kernel Random Generator is not using the algorithm described in Book2, section 11.3, is this function PCI approved? If the Level 2 Contact Kernel Random Generator is not using the algorithm described in Book2, section 11.3, describe the function (such as algorithm used, etc) Is the Random Generator function of the Level 2 Contact Kernel Software dependent on the Terminal Hardware? If answer to previous question is Yes, describe the Hardware (a clear description of the chipset is required) Are the Cryptographic functions (RSA, Hash, etc.) of the Level 2 Contact Kernel Software dependent on the Terminal Hardware? If answer to previous question is Yes, describe the Hardware (a clear description of the chipset is required) Is any other functions of the Level 2 Contact Kernel Software dependent on the Terminal Hardware? If answer to previous question is Yes, describe the functions and the Hardware (a clear description of the chipset is required) If the answer to at least one of the 6 previous questions is Yes, do you plan to port the Kernel to other Terminals having the same Hardware component supporting these above functions (Family of Terminal)? List the Currency Code(s) supported as for ISO 4217: (one currency shall be declared at a minimum, and up to 10 if multiple currencies are supported with at least one per currency exponent supported) Note: Changing from one currency supported to multiple is considered as a major change ASPRD Does the terminal support the Application Selection Registered Proprietary Data (ASRPD)? V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 11 of 25 List the Language(s) supported as for ISO 639 (minimum one shall be declared, and up to 10 if Multiple Languages are supported) 9F1D configuration TSC personalizati on TSC max value Max Biometric BDB Can the Kernel be configured so the data object ‘Terminal Risk Management Data’ ‘9F1D’ is absent or configured with no value (00 is a value)? Can the Transaction Sequence Counter (TSC) be personalized to any value? If answer to previous question is Yes, what is the Maximun Value of the Transaction Sequence Counter? If One of the Biometric CVM is supported, what is the Biometric Data Block Maximum Length supported? PART IV – EMV Specifications EMV Specification Date & Version: EMV Integrated Circuit Card Specifications for Payment Systems version 4.4, October 2022 V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 12 of 25 PART V – Description of functional Questions Title Description Terminal Capabilities Terminal Terminal Type Type Card Data Input Capability Manual Key Manual Key Entry Entry Magnetic Magnetic Stripe Stripe IC with IC with Contacts Contacts CVM Capability Plaintext PIN Plaintext PIN for ICC Verification Primary Conf nb. (in case of a Secondary) Online Enciphered PIN Signature Offline Enciphered PIN (RSA) No CVM Offline Enciphered PIN (ECC) Biometric To be filled only in case of a Secondary Configuration submission (see TA199): provide the associated Primary Configuration number Enciphered PIN for Online Verification Signature Enciphered PIN for Offline Verification (RSA ODE) No CVM Required Enciphered PIN for Offline Verification (ECC ODE) Does the Kernel support Biometric? If Yes: - The values in range 000110-001111 of the Book3, Table 39 - CVM Codes are considered as recognized values for unsupported Biometric CVM Codes - the Kernel implements the Biometric flow ‘T’ of the Book3, figure 9 - Biometric Data Objects as per Book3, Annex A1 are recognized by the Kernel, If no the kernel shall not support any Biometric requirements (the values in range 000110-001111 of the Book3, Table 39 - CVM Codes are considered as RFU) Comments Shall be always Supported Not allowed as Primary Configuration for Unattended Terminals see SB308 and TA 199 Offline Finger Online Finger Offline Facial If Biometric supported, does the Kernel support Finger biometric verified offline (by ICC)? If Biometric supported, does the Kernel support Finger biometric verified online (by ICC)? If Biometric supported, does the Kernel support Facial biometric verified offline (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 13 of 25 Online Facial If Biometric supported, does the Kernel support Facial biometric verified online (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Offline Palm If Biometric supported, does the Kernel support Palm biometric verified offline (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Online Palm If Biometric supported, does the Kernel support Palm biometric verified online (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Offline Iris If Biometric supported, does the Kernel support Iris biometric verified offline (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Online Iris If Biometric supported, does the Kernel support Iris biometric verified online (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Offline Voice If Biometric supported, does the Kernel support Voice biometric verified offline (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Online Voice If Biometric supported, does the Kernel support Voice biometric verified online (by ICC)? Note: This Biometric CVM is not supported for approval and testing in this version. In case your Product support it, please contact EMVCo Security Capability SDA & DDA Static Data Authentication and Dynamic Data Authentication (Mandatory for offline capable terminals) Card Card Capture Capture CDA Combined Dynamic Data Authentication / Application Cryptogram Generation (if CDA is supported it shall support one of the 4 modes described in EMV Book2) XDA Extended Data Authentication (XDA) V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 14 of 25 Title Description Additional Terminal Capabilities Transaction Type Capability At least one of the following transaction types must be supported: Cash Cash Goods Goods Services Services Cash Back Cash Back Inquiry Inquiry transfer Transfer Payment Payment Administrative Administrative Cash Cash Deposit Deposit Terminal Data Input Capability Keypad Does terminal have a keypad (If keypad is supported the terminal shall support one or more of the following key types:) Numeric Numeric Keys Keys Alpha & Alphabetic and Special Character Keys Special Keys Command Command Keys Keys Function Function Keys Keys Terminal Data Output Capability Print Print, Attendant and/or Cardholder Display Display, Attendant and/or Cardholder Code Table Code Table 10 10 Code Table Code Table 9 9 Code Table Code Table 8 8 Code Table Code Table 7 7 Code Table Code Table 6 6 Code Table Code Table 5 5 Code Table Code Table 4 4 Code Table Code Table 3 3 Code Table Code Table 2 2 Code Table Code Table 1 1 Comments V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 15 of 25 Title Description Application Selection PSE Support PSE selection Method Cardholder Support Cardholder Selection & Confirmation Confirmation Preferred Does the terminal have a preferred order of displaying display order applications Partial AID Does the terminal perform partial AID selection Selection Multi Does the terminal have multi language support Language EMV Does the terminal support the EMV Language Selection Language method Selection Common Does the terminal support the Common Character Set Character as defined in Annex B Table 20 Book 4 Set Selectable Kernel Configurations (MCK only) Dynamic Is your Multi-Configuration Kernel capable of Selection dynamically selecting a configuration at the time of transaction Data Authentication Revocation During data authentication does the terminal check of Issuer validity for revocation of Issuer Public Key Certificate Public Key Certificate Default Does the terminal contain a default DDOL DDOL (Mandatory for terminals supporting DDA) Cardholder Verification Method Bypass PIN Terminal supports bypass PIN Entry Entry Susbsequent If the terminal supports bypass PIN Entry: Bypass PIN When selecting to bypass a PIN method, all other PIN Entry entry methods are also considered bypassed. Get Data for Terminal supports Get Data for PIN Try Counter PIN Try Counter Fail CVM Terminal supports Fail CVM Amount known before CVM Processing Are amounts known before CVM processing Comments Shall be always Supported Shall be always Supported Shall be always Supported V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 16 of 25 Title Description Terminal Risk Management Floor limit Floor limit checking checking (Mandatory for offline only terminals and offline terminals with online capability) Random Random Transaction Selection Transaction Selection (Mandatory for offline terminals with online capability, except when cardholder controlled) Velocity Velocity Checking Checking (Mandatory for offline only terminals and offline terminals with online capability) Transaction Transaction Log Log Exception Exception File File TRM Terminal Risk Management performed irrespective of irrespective of AIP AIP setting (expected behavior) Terminal Action Analysis TAC Does the terminal support the Terminal Action Codes supported (If the answer is no, please contact EMVCo) TAC Can the Terminal Action Codes be deleted or disabled? deleted/or If yes, the default TAC values of the TAC-Online, TAC- disabled default and TAC-denial shall be set to zeroes Offline Only If Offline Only is supported, which option of the Offline processing Only Terminal processing is implemented? (according to Book3, section 10.7) TAC/IAC If Online Only is supported, how does online only default terminal process TAC/IAC-Default when unable to go process online? Completion Processing Forced Transaction Forced Online Capability Online Forced Transaction Forced Acceptance Capability Acceptance Voice Does the terminal support Issuer initiated Voice Referrals by Referrals Issuer Exception Handling POS Entry What is the POS Entry Mode value when IC cannot be Mode read and the transaction falls back using Magstripe POS Entry Mode Is the POS Entry Mode configurable? Configurable Comments Shall be always Supported a single value apply for all configurations Title PIN Pad Amount and PIN / same keypad Description Miscellaneous Is the terminal equipped with a PIN Pad (shall be answered ‘yes’ if Offline or Online PIN is supported) Is the amount and PIN entered at the same keypad Comments Supported Value V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 17 of 25 Combined ICC/Mag stripe Reader Account type selection ‘on fly’ script processing Issuer Script device limit > 128 bytes Script limit > 128 bytes, value supported Script limit > 128 bytes, value configurable Internal Date Management Receipt supported Is the ICC/Magstripe Reader combined Does the terminal support account type selection Does the terminal support ‘on fly’ script processing (not recommended behavior) Is the Issuer Script device limit greater than 128 bytes If the Issuer Script device limit is greater than 128 bytes, what is the value supported (If unlimited please enter 0) Note: if the kernel supports unlimited script length, a value of 400 bytes shall be used for testing purpose If the Issuer Script device limit is greater than 128, is the value supported configurable? Does the terminal support Internal Date Management (If the terminal is capable of managing the increment of dates internally without synchronization or instruction from the host, ‘Yes’ should be selected for this option) Does the terminal support Receipt (by printing or any electronic means)? a single value applies for all configurations V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 18 of 25 PART VI – Terminal Configurations The table below shall be used to describe all configurations submitted for type approval. The minimum number of configurations that must be supported is 1, there is no maximum number of configurations that may be submitted for type approval. If more than 10 configurations are submitted for type approval an additional ICS must be provided, detailing the additional configurations in Part VI. About Configuration unique numbers: - The unique number of the Baseline configuration (Baseline is always the column 1) is 01. - The Baseline configuration settings are always required in the ICS, whatever the submission (initial or subsequent submission). In case of Subsequent Submission, please copy the Baseline settings values submitted in the Initial Submission of this product. - Baseline configuration shall be the configuration, submitted during initial configuration, with the highest weight. - Please assign a unique number (02, 03, etc.) to each additional configuration listed in the table below. - If this ICS is a subsequent submission with additional configuration(s), make sure to assign to each new configuration a number that has not been used for another configuration during the previous session(s). Title Configurations Values Configuration 01 unique nb. Identification Terminal Type Manual Key Entry Magnetic Stripe IC with Contacts Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Plaintext PIN Online Enciphered PIN Primary Conf nb. (in case of a Secondary) Signature Offline Enciphered PIN (RSA) No CVM V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 19 of 25 Title Configurations Values Configuration 01 unique nb. Offline Enciphered PIN No No No No No No No No No No (ECC) Biometric Offline Finger Online Finger Offline Facial No No No No No No No No No No Online Facial No No No No No No No No No No Offline Palm No No No No No No No No No No Online Palm No No No No No No No No No No Offline Iris No No No No No No No No No No Online Iris No No No No No No No No No No Offline Voice No No No No No No No No No No Online Voice No No No No No No No No No No SDA and DDA Card Capture CDA XDA No No No No No No No No No No Cash Goods Services Cash Back Inquiry Transfer Payment Administrative Cash Deposit Keypad Numeric Keys Alpha & Special Keys Command Keys Function Keys Print V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 20 of 25 Title Configurations Values Configuration 01 unique nb. Display Code Table 10 Code Table 9 Code Table 8 Code Table 7 Code Table 6 Code Table 5 Code Table 4 Code Table 3 Code Table 2 Code Table 1 PSE Cardholder Confirmation Preferred display order Partial AID Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Selection Multi language EMV Language Selection Common Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Character Set Revocation of Issuer Public Key Certificate Default DDOL Bypass PIN Entry Subsequent Bypass PIN Entry Get Data for PIN Try Counter Fail CVM Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 21 of 25 Title Configuration 01 unique nb. Amount known before CVM processing Floor limit checking Random Transaction Selection Velocity Checking Transaction Log Exception File TRM irrespective Yes of AIP TAC supported TAC deleted/or disabled Offline Only processing TAC/IAC-Default process Forced Online Forced Acceptance Voice Referrals by Issuer POS Entry Mode POS Entry Mode Configurable PIN Pad Amount and PIN / same keypad V260526 Configurations Values Yes Yes Yes Yes Yes Yes Yes Yes Yes Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 22 of 25 Title Configuration 01 unique nb. Combined ICC/Magstripe Reader Account type selection ‘on fly’ script processing Issuer Script device limit > 128 bytes Script limit > 128 bytes, value supported Script limit > 128 bytes, value configurable Internal Date Management Receipt supported Configuration Checksum Total weight Configurations Values Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 Same as Config 01 V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 23 of 25 PART VII – Supported Combination(s) of PIN Pads / Configurations The table below shall be used to identify uniquely the supported Combinations of PIN Pads / Configurations. - The PIN Pad Unique numbers refer to those assigned in Part IIb of the present ICS but also to Part IIb of ICS used for previous submission(s) of the same product (if any). - The Configuration Unique numbers refer to those assigned in Part VI of the present ICS but also to Part VI of ICS used for previous submission(s) of the same product (if any). - Information provided in this table shall be exhaustive and consistent with the information of the section VII in ICS of the previous submission(s) (if any), so if a previous submission was made the table below contain also the information of these combinations. Supported combinations 01 02 03 04 Unique PIN Pad number 05 (as per 06 section IIb) 07 08 09 10 Unique Configuration number (as per section VI) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 24 of 25 Part VIII - Digital Signatures Product Provider I hereby declare that the above referenced product currently is and will remain in compliance with the above referenced EMV specification for all mandatory and supported optional requirements. Comments Signature Laboratory I hereby declare that this ICS document has been reviewed, and that all product information is consistent throughout the ICS. Comments Signature EMVCo Approval Secretariat Signature V260526 Copyright ©2026 EMVCo, LLC. All rights reserved. ICS Contact L2 – version 4.4d ICS Reference Number: Page 25 of 25