PCI Watch

Tracking changes across the Payment Card Industry

TTA Bulletin nº 227: Contact Terminal Level 2 Test Cases, Support of IIN – 8 digits

v3.0 Type Approval Bulletins
ChipContact Acceptance Device

EMV<sup>®</sup> Terminal Type Approval Bulletin No. 227 Third Edition, January 2021 Terminal Level 2 Test Cases Support of IINE – 8 digits

Applicability

This Bulletin applies to:

  • EMV<sup>®</sup> Terminal Type Approval - Level 2 Test Cases – version 4.3i

Related Documents

  • Specification Bulletin 231 Issuer Identification Number Extended (IINE)., December 2020

Effective Date

  • January 2020

Description

EMVCo introduced the Specification Bulletin 231 Issuer Identification Number Extended (IINE). Related to this Specification Bulletin, Related to this bulletin, new tests cases are introduced and some are updated on the EMVCo Type Approval Terminal Level 2 Test Cases v4.3i. Update to EMVCo Type Approval Terminal Level 2 Test Cases v4.3i Revised test cases: 2CA.122.02 2CA.122.03 2CA.122.08 2CA.122.09 2CA.122.11 2CA.122.12 2CA.122.14 2CA.122.15 2CA.122.17 2CA.122.18 2CA.122.20 2CA.122.21 2CA.122.23 2CA.122.24 2CA.123.01 2CA.123.04

countries.

New test cases: 2CA.093.01 2CA.097.01 2CA.099.02 2CA.100.02 Deleted test cases: None

countries.

2CA.093.01 Test No: Objective: Reference EMV 4.3: Terminal Configuration: Terminal Configuration (New format): Conditions: Syntax of SELECT PSE returned Data Field (2) 2CA.093.01 - Revision 43j - Number of sub cases: 3 To ensure that if the terminal supports selection with PSE, it is able to recognize the FCI returned Data field of the SELECT PSE command with an IINE. Book 1 - Section 11.3.4 - Data Field Returned in the Response Message Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) [PSE]

  • LT contains a PSE
  • FCI of PSE contains all mandatory data field: FCI Template (‘6F’), DF Name (‘84’), FCI Proprietary Template ‘A5’, SFI of the Directory File (‘88’)
  • FCI of PSE contains all optional data objects: Language Preference (‘5F 2D’), Issuer Code Table Index (‘9F 11’), FCI Issuer discretionary Data (tag BF0C) of PSE contains data fields: '5F54' Bank Identifier Code (BIC), '5F53' International Bank Account Number (IBAN), '5F55' Issuer Country Code (alpha 2), '5F56' Issuer Country Code (alpha 3)
  • Case 01: FCI of PSE contains: '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 02: FCI of PSE contains: '42' Issuer Identifier Number (3 bytes length, 6 digits value) and '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 03: FCI of PSE contains: '9F0C' Issuer Identifier Number Extended (3 bytes length, 6 digits non-zero value). Action: Procedure: Pass Criteria: NA Application in LT is selected and transaction is performed with LT.
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC.
  • LT shall receive a READ RECORD command with SFI coded according to data returned in FCI countries. 2CA.097.01 Test No: Objective: Reference EMV 4.3: Terminal Configuration: Terminal Configuration (New format): Conditions: Syntax of SELECT ADF returned Data Field (2) 2CA.097.01 - Revision 43j - Number of sub cases: 3 To ensure that the terminal is able to recognize the data field returned by SELECT ADF command with an IINE. Book 1 - Section 11.3.4 - Data Field Returned in the Response Message Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) [NA]
  • LT contains an ADF
  • FCI of ADF contains all mandatory fields:FCI template (‘6F’), DF Name (‘84’), FCI Proprietary Template (‘A5’), Application Label (‘50’)
  • FCI of ADF contains all optional data objects: Application Priority Indicator (‘87’), PDOL (‘9F38’), Language Preference (‘5F 2D’), Issuer Code Table Index (‘9F 11’), Application Preferred Name (‘9F 12’) and FCI issuer Discretionary Data (‘BF 0C’) containing: ‘9F 4D’ '5F54' Bank Identifier Code (BIC), '5F53' International Bank Account Number (IBAN), '5F55' Issuer Country Code (alpha 2), '5F56' Issuer Country Code (alpha 3)
  • Case 01: FCI of ADF contains: '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 02: FCI of ADF contains: '42' Issuer Identifier Number (3 bytes length, 6 digits value) and '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 03: FCI of ADF contains: '9F0C' Issuer Identifier Number Extended (3 bytes length, 6 digits non-zero value). Action: Procedure: Pass Criteria: NA Application in LT is selected and transaction is performed with LT.
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC. countries. 2CA.099.02 PSE (2) Test No: Objective: Reference EMV 4.3: Terminal Configuration: Terminal Configuration (New format): Conditions: Response to Proprietary Data in FCI from a SELECT 2CA.099.02 - Revision 43j - Number of sub cases: 3 To ensure that if the terminal supports selection with PSE, the terminal processes the transaction to completion when additional data objects in the selection by PSE are returned. Book 1 - Section 11.3.4 - Data Field Returned in the Response Message Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) [PSE]
  • LT contains a PSE.
  • FCI Issuer discretionary Data (tag BF0C) of PSE contains data fields: '5F54' Bank Identifier Code (BIC), '5F53' International Bank Account Number (IBAN), '5F55' Issuer Country Code', '5F56' Issuer Country Code.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains: '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of PSE contains: '42' Issuer Identifier Number (3 bytes length, 6 digits value) and '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 03: FCI Issuer discretionary Data (tag BF0C) of PSE contains: '9F0C' Issuer Identifier Number Extended (3 bytes length, 6 digits non-zero value). Action: Procedure: Pass Criteria: NA Application in LT is selected and transaction is performed with LT.
  • The terminal shall ignore the unrecognised or additional EMV data objects.
  • The terminal shall perform the application selection process with PSE and process the transaction until completion, by requesting a TC. countries. 2CA.100.02 Additional data object facilitating domestic processing in selection with PSE (2) Test No: 2CA.100.02 - Revision 43j - Number of sub cases: 3 Objective: To ensure that if the terminal supports selection with PSE, the terminal processes the transaction to completion when additional data objects facilitating domestic processing in the selection by PSE are returned. Reference Book 1 - Section 11.3.4 - Data Field Returned in the Response Message EMV 4.3: Book 1 - Section 12.2.3 - Coding of a Payment System Directory Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT contains a PSE.
  • Directory Discretionary template (‘73’ template) of the ADF entry contains data fields: '5F54' Bank Identifier Code (BIC), '5F53' International Bank Account Number (IBAN), '5F55' Issuer Country Code', '5F56' Issuer Country Code.
  • Case 01: Directory Discretionary template (‘73’ template) of the ADF entry contains data fields: '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 01: Directory Discretionary template (‘73’ template) of the ADF entry contains data fields: '42' Issuer Identifier Number (3 bytes length, 6 digits value) and '9F0C' Issuer Identifier Number Extended (4 bytes length, 8 digits non-zero value).
  • Case 01: Directory Discretionary template (‘73’ template) of the ADF entry contains data fields: '9F0C' Issuer Identifier Number Extended (3 bytes length, 6 digits non-zero value). Action: Procedure: Pass Criteria: NA Application in LT is selected and transaction is performed with LT.
  • The terminal shall perform the application selection process with PSE and process the transaction until completion, by requesting a TC.
  • Additional data objects facilitating domestic processing are either ignored or used by the terminal. countries. 2CA.122.02 EMV reserved Data objects processing (1) Test No: 2CA.122.02 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal NA Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is B000001234
  • Terminal AID Value is B000001234
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.02 EMV reserved Data objects processing (1) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC.
  • Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed)
  • TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC countries. 2CA.122.03 EMV reserved Data objects processing (2) Test No: 2CA.122.03 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is B000001234
  • Terminal AID Value is B000001234
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. Action: NA countries. 2CA.122.03 EMV reserved Data objects processing (2) Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC.
  • Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.08 EMV reserved Data objects processing (5) Test No: 2CA.122.08 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal NA Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A000000025
  • Terminal AID Value is A000000025
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.08 EMV reserved Data objects processing (5) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC.
  • Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed)
  • TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.09 EMV reserved Data objects processing (6) Test No: 2CA.122.09 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A000000025
  • Terminal AID Value is A000000025
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. Action: NA countries. 2CA.122.09 EMV reserved Data objects processing (6) Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC.
  • Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.11 EMV reserved Data objects processing (8) Test No: 2CA.122.11 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A0000000031010
  • Terminal AID Value is VISA A0000000031010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F0C’, ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.11 EMV reserved Data objects processing (8) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F0C’, ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall process the transaction until completion, by requesting a TC either at First or Second GENERATE AC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00"(Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.12 EMV reserved Data objects processing (9) Test No: 2CA.122.12 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A0000000031010
  • Terminal AID Value is A0000000031010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. countries. 2CA.122.12 EMV reserved Data objects processing (9) Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall process the transaction until completion, by requesting a TC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.14 EMV reserved Data objects processing (11) Test No: 2CA.122.14 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A0000000041010
  • Terminal AID Value is A0000000041010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.14 EMV reserved Data objects processing (11) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.15 EMV reserved Data objects processing (12) Test No: 2CA.122.15 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A0000000041010
  • Terminal AID Value is A0000000041010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. countries. 2CA.122.15 EMV reserved Data objects processing (12) Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.17 EMV reserved Data objects processing (14) Test No: 2CA.122.17 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A0000000651010
  • Terminal AID Value is A0000000651010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.17 EMV reserved Data objects processing (14) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.18 EMV reserved Data objects processing (15) Test No: 2CA.122.18 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A0000000651010
  • Terminal AID Value is A0000000651010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. countries. 2CA.122.18 EMV reserved Data objects processing (15) Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.20 EMV reserved Data objects processing (17) Test No: 2CA.122.20 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A000000333010101
  • Terminal AID Value is A000000333010101
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.20 EMV reserved Data objects processing (17) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.21 EMV reserved Data objects processing (18) Test No: 2CA.122.21 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A000000333010101
  • Terminal AID Value is A000000333010101
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. countries. 2CA.122.21 EMV reserved Data objects processing (18) Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.122.23 EMV reserved Data objects processing (20) Test No: 2CA.122.23 – Revision 43j – Number of sub cases: 5 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal Configuration: Terminal [NA] Configuration (New format): Conditions:
  • LT AID value is A0000001523010
  • Terminal AID Value is A0000001523010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: FCI (tag 6F) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero within the FCI template
  • Case 02: FCI Issuer discretionary Data (tag BF0C) of ADF contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero
  • Case 03: Response to GENERATE AC contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 04: Records contains: all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in countries. 2CA.122.23 EMV reserved Data objects processing (20) the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero (splitted over SFI 1 to 10).
  • Case 05: Response to GET PROCESSING OPTIONS contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77 Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC either at First or Second GENERATE AC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) TVR byte 1 - bit 1, byte 2 - bit 3, byte 4 - bit 1, byte 5 – bits 4 to 1 are set to ‘0’, received at 1st GENERATE AC. countries. 2CA.122.24 EMV reserved Data objects processing (21) Test No: 2CA.122.24 - Revision 43j - Number of sub cases: 3 Objective: To ensure that the terminal ignores EMV reserved Data Objects (not used by EMV). Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [PSE] supported Configuration: Terminal [PSE] Configuration (New format): Conditions:
  • LT AID value is A0000001523010
  • Terminal AID Value is A0000001523010
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • PSE contains a directory file with entries for ADF.
  • Case 01: FCI Issuer discretionary Data (tag BF0C) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’' with values different from zero.
  • Case 02: FCI (tag 6F) of PSE contains additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero.
  • Case 03: Template '73' of ADF Directory Entry contains: additionally all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero. countries. 2CA.122.24 EMV reserved Data objects processing (21) Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall accept the card and process the transaction until completion, by requesting a TC. Values of the EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.123.01 EMV reserved Data objects processing Test No: 2CA.123.01 - Revision 43j - Number of sub cases: 2 Objective: To ensure that the terminal ignores EMV reserved Data Objects. Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [DDA] supported Configuration: Terminal [DDA] Configuration (New format): Conditions:
  • LT AID value is B000001234
  • Terminal AID Value is B000001234
  • PDOL, CDOL1, CDOL2 and TDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’.
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: Response to INTERNAL AUTHENTICATE contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’ and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 02: The DDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’ and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’and these data are stored in LT with values different from zero Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. countries. 2CA.123.01 EMV reserved Data objects processing Pass Criteria:
  • The terminal shall process the transaction until completion, by requesting a TC.
  • Values of the reserved tags in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ received by the LT via the DOLs are set to "00" (Note: for CDOL2 this is applicable only if a 2nd GENERATE AC has been performed) countries. 2CA.123.04 EMV reserved Data objects processing Test No: 2CA.123.04 - Revision 43j - Number of sub cases: 2 Objective: To ensure that the terminal ignores EMV reserved Data Objects. Reference Book 3 – Annex B1 Coding of the Tag Field of BER-TLV Data Objects EMV 4.3: Book Bulletins - Section SB 197 - Bulletin n°197, Tokenisation Data Objects – Token Requestor ID and Last 4 Digits of PAN (May 2017) Book Bulletins - Section SB 185 - Bulletin n°185, Biometric Terminal Specification (March 2017) Book Bulletins - Section SB 231 - Bulletin n°231, Issuer Identification Number Extended (IINE) (December 2020) Terminal [DDA] supported Configuration: Terminal [DDA] Configuration (New format): Conditions:
  • LT AID value is A000000025
  • Terminal AID Value is A000000025
  • All Data Elements listed in the Specification Bulletin SB 185, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 197, Table 34 are excluded from the below lists.
  • All Data Elements listed in the Specification Bulletin SB 231, Table 34 are excluded from the below lists.
  • Case 01: Response to INTERNAL AUTHENTICATE contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’ and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ with values different from zero and shall be encoded in template 77
  • Case 02: The DDOL of LT contains all EMV primitive tags reserved but not used in the EMV specification, (for example ‘9F28’ and ‘9F29’, …) in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ and these data are stored in LT with values different from zero Action: NA Procedure: Application in LT is selected and transaction is processed with LT until approval. Pass Criteria:
  • The terminal shall process the transaction until completion, by requesting a TC. countries. 2CA.123.04 EMV reserved Data objects processing
  • Case 02: Values of the reserved tags in the range ‘80’ to ‘9E’ and ‘9F01’ to ‘9F4F’ received by the LT via the DDOL are set to "00" countries.

Legal Notice

This document summarizes EMVCo’s present plans for evaluation services and related policies and is subject to change by EMVCo at any time. This document does not create any binding obligations upon EMVCo or any third party regarding the subject matter of this document, which obligations will exist, if at all, only to the extent set forth in separate written agreements executed by EMVCo or such third parties. In the absence of such a written agreement, no product provider, test laboratory or any other third party should rely on this document, and EMVCo shall not be liable for any such reliance. No product provider, test laboratory or other third party may refer to a product, service or facility as EMVCo approved, in form or in substance, nor otherwise state or imply that EMVCo (or any agent of EMVCo) has in whole or part approved a product provider, test laboratory or other third party or its products, services, or facilities, except to the extent and subject to the terms, conditions and restrictions expressly set forth in a written agreement with EMVCo, or in an approval letter, compliance certificate or similar document issued by EMVCo. All other references to EMVCo approval are strictly prohibited by EMVCo. Under no circumstances should EMVCo approvals, when granted, be construed to imply any endorsement or warranty regarding the security, functionality, quality, or performance of any particular product or service, and no party shall state or imply anything to the contrary. EMVCo specifically disclaims any and all representations and warranties with respect to products that have received evaluations or approvals, and to the evaluation process generally, including, without limitation, any implied warranties of merchantability, fitness for purpose or non-infringement. All warranties, rights and remedies relating to products and services that have undergone evaluation by EMVCo are provided solely by the parties selling or otherwise providing such products or services, and not by EMVCo, and EMVCo will have no liability whatsoever in connection with such products and services. This document is provided "AS IS" without warranties of any kind, and EMVCo neither assumes nor accepts any liability for any errors or omissions contained in this document. EMVCO DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT, AS TO THIS DOCUMENT. EMVCo makes no representations or warranties with respect to intellectual property rights of any third parties in or in relation to this document. EMVCo undertakes no responsibility to determine whether any implementation of this document may violate, infringe, or otherwise exercise the patent, copyright, trademark, trade secret, know-how, or other intellectual property rights of third parties, and thus any person who implements any part of this document should consult an intellectual property attorney before any such implementation. Without limiting the foregoing, this document may provide for the use of public key encryption and other technology, which may be the subject matter of patents in several countries. Any party seeking to implement this document is solely responsible for determining whether its activities require a license to any such technology, including for patents on public key encryption technology. EMVCo shall not be liable under any theory for any party's infringement of any intellectual property rights in connection with this document.

countries.