CTA/MTA Bulletin nº 31: Card and Mobile Test Plan Activation Dates

EMV® Card and Mobile Type Approval Bulletin No. 031 Fifteenth Edition, November 2025 Card and Mobile Test Plan Activation Dates Applicability • This Approval Bulletin applies to all Card and Mobile approval processes Related Documents • EMV Integrated Circuit Card Specifications for Payment Systems – Books 1, 2, 3, 4, version 4.4, October 2022 • EMV Level 1 Specifications for Payment Systems – EMV Contact Interface Specification, version 1.0, October 2022 • EMV Specification Bulletin No.284, 1st Edition, March 2023 – Contact – Clarification for Procedure Byte Use • EMV Specification Bulletin No.298, 1st Edition, September 2023 – Contact – Clarification of Terminal Timing for Consecutive Characters • EMV Integrated Circuit Card Specifications for Payment Systems - Common Payment Application Specification, version 1.0, December 2005 • Specification Update Bulletins 56, 58, 60, 61, 62, 63, 64, 65, 165, 281 latest version • Application Note Bulletins 39, 40, latest version • EMV Card Type Approval – CPA Level 1 & 2 - Administrative Process, latest version • EMV Contact Card Level 1 Type Approval - ICC Electrical Test Cases, Version 1.0a, December 2023 • EMV Contact Card Level 1 Type Approval - ICC Protocol Test Cases, Version 1.0a, December 2023 • EMV Card Type Approval – CPA Level 2 – Test Cases version 1.0.o3 Part A Final, July 2025 • EMV Card Type Approval – CPA Level 2 – Test Cases version 1.0.o3 Part B Final, July 2025 • EMV Card Type Approval – CPA Level 1 and Level 2 – Card Image Requirements version 1.0.o Final, September 2024 • EMV Card Type Approval CPA Implementation Conformance Statement, version 1.0.o • EMV Card Type Approval – CCD Level 1 & 2 - Administrative Process, latest version • EMV Card Type Approval – CCD Level 2 – Test Cases version 4.4.a Final, October 2023 • EMV Card Type Approval – CCD Level 1 and Level 2 – Card Image Requirements version 4.4.a.r Final, September 2025 • EMV Card Type Approval CCD Implementation Conformance Statement, version 4.4.a • EMV Contactless Mobile Payment - PPSE and Application Management for Secure Elements, version 1.0, May 2017 • EMV Contactless Mobile Payment Type Approval – Administrative Process latest version • EMV Contactless Mobile Payment Type Approval – PPSE and Application Management for Secure Element – Test Cases version 1.0.g2 Final Draft, June 2021 • EMV Contactless Mobile Payment Type Approval – CMP SE Test Applet Requirements v1.3.0, January 2018 • EMV Contactless Mobile Payment Secure Element Implementation Conformance Statement v1.0.g • EMV Contactless Mobile Payment PPSE Applet Implementation Conformance Statement v1.0.g • EMV Level 1 Specifications for Payment Systems – EMV Contactless Interface Specification, version 3.2, July 2022 • EMV Mobile Product Level 1 Type Approval – Administrative Process, version 2.8, January 2025 • EMV Contactless Card Level 1 Type Approval – PICC Analogue Test Bench and Test Case Requirements, version 3.2b, January 2025 • EMV Contactless Card Level 1 Type Approval – PICC Digital Test Cases, version 3.2b, January 2025 © 2025 EMVCo, LLC. All rights reserved. Reproduction, distribution and other use of this document is permitted only pursuant to the applicable agreement between the user and EMVCo found at www.emvco.com. EMV® is a registered trademark or trademark of EMVCo, LLC in the United States and other countries. Page 1 • EMV Mobile Product Level 1 Type Approval - Validation and Interoperability Testing Requirements, version 1.8, September 2025 • EMV Mobile Product Level 1 Type Approval ― Mobile Level 1 Test Guidelines, version 3.2b, January 2025 • EMV Mobile Product Level 1 Type Approval - Test Application Requirements version 2.0.2.r, September 2025 • EMV Mobile Product Level 1 Implementation Conformance Statement (ICS), version 3.2b • EMV Biometric Card Specifications for Payment Systems – Biometric Card Provider Requirements version 1.0 • EMV Fingerprint Sensor Assessment – Administrative Process version 1.0 • EMV Fingerprint Sensor Assessment – Instructions for Fingerprint Sensor Testing version 1.0 • EMV Fingerprint Sensor Assessment – Implementation Conformance Statement version 1.0 Effective Date • Immediately This bulletin provides the activation and deactivation dates for the EMV Card and Mobile Type Approval Test Plans. Card Type Approval The following Activation and Deactivation dates have been defined for the test cases (TC) used for Card Type Approval for CPA and CCD. Please see the EMV Card Type Approval Administrative Process documents for the impact of changes to the test cases on the Card Type Approval Process. Contact L1 TC 1.0a Activation Date January 1, 2024 Deactivation Date New Products Change, Derivative, Renewals - - L2 CCD TC 4.4.a 4.3.f Activation Date March 1, 2025 May 15, 2019 Deactivation Date New Products Change, Derivative, Renewals - - April 30, 2025 April 30, 2025 L2 CPA TC 1.0.o3 1.0.m Activation Date March 1, 2025 May 15, 2019 Deactivation Date New Products Change, Derivative, Renewals - - April 30, 2025 April 30, 2025 © 2025 EMVCo, LLC. All rights reserved. Reproduction, distribution and other use of this document is permitted only pursuant to the applicable agreement between the user and EMVCo found at www.emvco.com. EMV® is a registered trademark or trademark of EMVCo, LLC in the United States and other countries. Page 2 Although there is no EMVCo Contactless Level 1 Card Type Approval Process, EMVCo specifies test plans and tools for Level 1 Card Contactless testing. The activation and deactivation dates of the test plans are defined below. Contactless L1 TC Analogue v3.2b Digital v3.2b Analogue v3.2a Digital v3.2a Activation Date March 1, 2025 March 1, 2025 March 1, 2024 March 1, 2024 Fingerprint Sensor Assessment The following Activation dates have been defined for the test instructions used for Fingerprint Sensor Assessment. Laboratory Test Instructions 1.0 Activation Date November 17, 2025 Deactivation Date New Products - Change, Derivative, Renewals - Level 1 Mobile Type Approval The following Activation dates have been defined for Level 1 Mobile Type Approval. Mobile L1 TC Analogue v3.2b Digital v3.2b Analogue v3.2a Digital v3.2a Activation Date March 1, 2025 March 1, 2025 March 1, 2024 March 1, 2024 Deactivation Date New Products Change, Derivative, Renewals - - - - April 30, 2025 April 30, 2025 April 30, 2025 April 30, 2025 Level 1 Mobile Test Guidelines (*) v3.2b v3.2a Activation Date March 1, 2025 March 1, 2024 Deactivation Date New Products Change, Derivative, Renewals April 30, 2025 April 30, 2025 (*) Level 1 Mobile Test Guidelines identified due to the impact to L1 Mobile Test Cases © 2025 EMVCo, LLC. All rights reserved. Reproduction, distribution and other use of this document is permitted only pursuant to the applicable agreement between the user and EMVCo found at www.emvco.com. EMV® is a registered trademark or trademark of EMVCo, LLC in the United States and other countries. Page 3 CMP/PPSE Type Approval The following Activation dates have been defined for the test cases (TC) used for CMP/PPSE Type Approval. CMP/PPSE TC 1.0g2 Activation Date January 1,2022 Deactivation Date New Products Change, Derivative, Renewals Test cases are only made available to laboratories and test tool providers. For additional information please contact EMVCo Card Testing Group Secretariat at card_approval@emvco.com. © 2025 EMVCo, LLC. All rights reserved. Reproduction, distribution and other use of this document is permitted only pursuant to the applicable agreement between the user and EMVCo found at www.emvco.com. EMV® is a registered trademark or trademark of EMVCo, LLC in the United States and other countries. Page 4 Legal Notice This document is subject to change by EMVCo at any time. This document does not create any binding obligations upon EMVCo or any third party regarding the subject matter of this document, which obligations will exist, ifat all, only to the extent set forth in separate written agreements executed by EMVCo or such third parties. In the absence of such a written agreement, no product provider, test laboratory or any other third party should rely on this document, and EMVCo shall not be liable for any such reliance. No product provider, test laboratory or other third party may refer to a product, service or facility as EMVCo approved, in form or in substance, nor otherwise state or imply that EMVCo (or any agent of EMVCo) has in whole or part approved a product provider, test laboratory or other third party or its products, services, or facilities, except to the extent and subject to the terms, conditions and restrictions expressly set forth in a written agreement with EMVCo, or in an approval letter, compliance certificate or similar document issued by EMVCo. All other references to EMVCo approval are strictly prohibited by EMVCo. Under no circumstances should EMVCo approvals, when granted, be construed to imply any endorsement or warranty regarding the security, functionality, quality, or performance of any particular product or service, and no party shall state or imply anything to the contrary. EMVCo specifically disclaims any and all representations and warranties with respect to products that have received evaluations or approvals, and to the evaluation process generally, including, without limitation, any implied warranties of merchantability, fitness for purpose or non-infringement. All warranties, rights and remedies relating to products and services that have undergone evaluation by EMVCo are providedsolely by the parties selling or otherwise providing such products or services, and not by EMVCo, andEMVCo will have no liability whatsoever in connection with such products and services. This document is provided "AS IS" without warranties of any kind, and EMVCo neither assumes nor accepts any liability for any errors or omissions contained in this document. EMVCO DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT, AS TO THIS DOCUMENT. EMVCo makes no representations or warranties with respect to intellectual property rights of any third parties in or in relation to this document. EMVCo undertakes no responsibility to determine whether any implementation of this document may violate, infringe, or otherwise exercise the patent, copyright, trademark, trade secret, know-how, or other intellectual property rights of third parties, and thus any person who implements any part of this document should consult an intellectual property attorney before any such implementation. Without limiting the foregoing, this document may provide for the use of public key encryption and other technology, which may be the subject matter of patents in several countries. Any party seeking to implement this document is solely responsible for determining whether its activities require a license to any such technology, including for patents on public key encryption technology. EMVCo shall not be liable under any theory for any party's infringement of any intellectual property rights in connection with this document. © 2025 EMVCo, LLC. All rights reserved. Reproduction, distribution and other use of this document is permitted only pursuant to the applicable agreement between the user and EMVCo found at www.emvco.com. EMV® is a registered trademark or trademark of EMVCo, LLC in the United States and other countries. Page 5